Major Section: INTRODUCTION-TO-THE-THEOREM-PROVER
This brief review of the programming language is presented as a sequence of questions and answers meant to test your knowledge of the ACL2 programming language. If you want a gentle introduction to the programming language, see http://www.cs.utexas.edu/users/moore/publications/gentle-intro-to-acl2-programming.html.
Before we get started with the programming drill, let us remind you that all we're
interested in here is the language, not the ``program development environment.''
It's impossible to program in ACL2 or any other language without a decent
environment, one that at the very least includes a way to prepare and edit
files of programs. The two most popular program development environments among
ACL2 users are Emacs 
and the Eclipse-based ACL2-Sedan .
The Sedan provides the most support for the new user, including real-time syntax
checking and a facility for testing among many other features. But in this
drill we're not interested in the program development environment, we're interested
in your understanding of the ACL2 language.
Q: What do you think this command does?
(defun rev (x)
(if (endp x)
nil
(append (rev (cdr x)) (list (car x)))))
A: It defines a function named rev that takes one argument, treats
it like a list, and reverses the order of the elements in
that list. To figure this out from the definition, you have to know that
append concatenates two lists. Logically speaking, the defun of
rev adds the axiom:
(rev x)
=
(if (endp x)
nil
(append (rev (cdr x)) (list (car x)))),
implicitly quantified for all x.
Q: Given the defun of rev above, what are the formal parameters?
What is the body of the definition? Write down a call of append
that occurs in the body of rev. What are the actuals of that call?
A: The formals of rev is the list of variables after the first rev
in the defun, namely (x). We say x is the first (and only) formal here.
The body of rev is the entire if-expression. The only call of
append in the body is
(append (rev (cdr x)) (list (car x)))and the actuals of that call are, respectively,
(rev (cdr x)) and
(list (car x)).
Q: What do you get if you evaluate (rev '(a b c d))? A:
(D C B A).
Q: How did rev change the case of the elements, e.g., lowercase a
was in the input list but uppercase A was in the output? A:
This is a trick question. Rev doesn't change the case of the elements.
ACL2 is case-insensitive when dealing with symbols. The symbol a is
read in as the symbol A. Thus, when writing function names, for
example, we can write rev, Rev, REV, or even ReV
and always be referring to the function REV. By default, ACL2
prints symbols in uppercase.
Q: What does (rev '((a b c) "Abc" "a" b #\c)) return? A:
(#\c B "a" "Abc" (A B C)). If you thought the answer was any of
these, then you need to think or read more carefully:
(#\C B "A" "ABC" (A B C))The first wrong answer above is wrong because Lisp is ``case insensitive'' only for symbols, not for character objects like(#\C B "A" "ABC" (C B A))
#\c (the lowercase character c)
or for strings. Furthermore, "A" is a string, not a symbol; it is different
from A. The second wrong answer above is wrong because rev does not
go into the individual elements of the list, it just reverses the order of the
elements. So it doesn't change the element (A B C) to (C B A).
Q: In the question about what (rev '(a b c d)) returns, we put a quote
mark before the (a b c d) but not before the answer, (D C B A).
Why? A: The phrase ``x evaluates to y'' treats
x as a term to be evaluated and y as an object.
(Rev '(a b c d)) is a term to be evaluated and denotes
a call of the function rev on the value of the argument term
'(a b c d). The value of that argument term is the object (a b c d).
The value of the call of rev is the object (d c b a).
If you have an object, obj, and you wish to create a term whose
value is obj, then you put a quote mark in front of it, 'obj.
Q: Can rev be applied to something other than a list? A: Yes,
every ACL2 function can be applied to any object. ACL2 is an untyped
programming language: every variable ranges over the entire universe of
objects. In normal usage, rev is applied to lists but there is nothing
about the syntax of the language that prevents it being applied to
non-lists.
Q: So what does (rev 23) evaluate to? A: Nil.
Q: Why? A: Because (endp 23) is t, because endp is
defined:
(defun endp (x) (not (consp x)))Thus, if
rev is applied to anything that is not a cons, it returns
nil.
Q: So what does (rev '(a b c . d)) evaluate to? A: (c b a).
To explain why requires demonstrating that you know what (a b c . d)
means. It is the object computed by evaluating:
(cons 'a
(cons 'b
(cons 'c
'd))).
That is, it is a list whose ``terminal marker'' is the atom D.
Rev treats that list exactly as it treats the nil-terminated
list of the same elements, (a b c), because (endp 'D) =
(endp nil) = t.
Q: What does (rev 1 2 3) evaluate to? A: That's a trick question.
Rev takes one argument, not three. So (rev 1 2 3) is an ill-formed term.
Q: What does (rev '(a b c . d . nil)) evaluate to? A: That is
a trick question. There is no such object. In Lisp's ``dot notation''
every dot must be followed by a well-formed object and then a close
parenthesis. Usually that ``well-formed object'' is an atom. If it is
not an atom, i.e., if it is a cons, then the entire expression could have
been written without that dot. For example, (a b c . (d e)) is
an object, but it could be written (a b c d e).
Q: Do (rev (rev x)) and x always evaluate to the same object? A:
No. (Rev (rev 23)) evaluates to nil, not 23.
Q: Do (rev (rev x)) and x always evaluate to the same object when
x is a cons? A: No.
(rev (rev '(a b c . d))) evaluates to (a b c), not (a b c . d).
Q: When are (rev (rev x)) and x equal? A: When the terminal
marker of x is nil.
Q: Can you define a Lisp function that recognizes nil-terminated lists?
A: Yes, but it is not necessary for the user to define that
concept because Common Lisp provides such a
function which is logically defined as follows:
(defun true-listp (x)
(if (consp x)
(true-listp (cdr x))
(equal x nil))).
This can be paraphrased: (true-listp x) means that if x is a
cons, its cdr is a true-listp and if x is not a cons, it
must be nil. Thus, (true-listp '(a b c)) is t and
(true-listp '(a b c . d)) is nil.
Q: Can you write a Lisp formula that says ``If z is a nil-terminated
list then reversing the result of reversing z is z''?
A: Yes:
(implies (true-listp z)
(equal (rev (rev z)) z)).
Q: Is this all there is to ACL2 programming? A: No! ACL2 provides
many other features. For a full list of all the primitive functions in ACL2
see programming . Some highlights for the beginner are mentioned below,
but all of the links below ought to be tagged with the sign.
* list: build a nil-terminated list from the values of n terms, e.g.,
(list x (+ 1 x) (+ 2 x)) returns (3 4 5) if x is 3.
* list*: build a non-nil terminated list of n objects from the
values of n+1 terms, e.g., (list* x (+ 1 x) (+ 2 x) (* -1 x)) returns
the list (3 4 5 . -3) if x is 3.
* and, or, not, implies, iff: The propositional
connectives. And and or are allowed to take a varying number of arguments, e.g.,
(and p q r) is just an abbreviation for (and p (and q r)).
In Lisp, and returns nil if any of its arguments evaluates to nil; otherwise
it returns the value of the last argument! Thus, (and t t 3) returns 3! If you
object to the idea that and is not Boolean, don't give it non-Boolean arguments!
Similarly, or returns the value of the first argument that evaluates to
non-nil, or nil if they all evaluate to nil. Both and and or can
be thought of as ``lazy'' in that they don't always have to evaluate all their arguments.
This is really accomplished by treating and and or as abbrevations for if
nests.
* +, *, -, /, floor, mod, <, <=, >=, >:
the Lisp elementary arithmetic operators. Both + and * allow varying numbers of
arguments. All the arithmetic operators default non-numeric arguments to 0. If you
don't like the idea that (+ 1 2 t) is 3, don't ask + to add t to something!
* natp, integerp, rationalp, characterp, stringp, symbolp,
consp: the recognizers for the primitive data types. The first three recognize subsets of
the ACL2 numeric universe. The naturals are a subset of the integers, the integers are a
subset of the rationals, and the rationals are a subset of the objects recognized by
acl2-numberp, which also includes the complex-rationalps. The other
recognizers listed above recognize characters, strings, symbols, and conses.
* cond: a convenient way to write a cascading nest of ifs, e.g.,
(cond ((not (natp x)) 'non-natural)
((equal x 0) 'zero)
((evenp x) 'positive-even)
(t 'positive-odd))
abbreviates
(if (not (natp x))
'non-natural
(if (equal x 0)
'zero
(if (evenp x)
'positive-even
'positive-odd))).
* case: a convenient way to case split on the identity of an object.
(case key (non-natural -1) (zero 0) ((positive-even positive-odd) 'positive-natural) (otherwise 'unknown))abbreviates
(cond ((eql key 'non-natural) -1)
((eql key 'zero) 0)
((member key '(positive-even positive-odd))
'positive-natural)
(t 'unknown)).
* user defined macros: using defmacro you can introduce your own
abbreviations. We recommend you not do this until you're good at list processing
since macros are functions that build objects representing terms.
* mutual-recursion: allows you to define mutually-recursive functions.
* mv and mv-let: allow functions to return ``multiple-values''.
In Lisp, such functions return vectors of values, the vectors are represented as
lists of values, but the implementations are generally more efficient. For example,
(mv x y z) returns a ``vector'' consisting of the values of x, y, and z.
(mv-let (a b c)
(foo x)
(bar a b c x))
evaluates (foo x), treats the result as a vector of three values, binds the variables
a, b, and c to those three values, and evaluates and returns (bar a b c x).
ACL2 also provides many other features, such as single-threaded objects which may be
``destructively modified'' (see stobj , including a very special single-threaded
object that records the state of the ACL2 system), file input and output (see io ),
applicative arrays (see arrays ) and property lists (see getprop ) and other
facilities necessary for it to be a practical programming language.
However, we strongly recommend that as a new user you stay away from these features until
you are good at proving theorems about elementary list processing!
If this little drill made sense to you, you know enough of the programming language to get started. Use your browser's Back Button now to return to introduction-to-the-theorem-prover.
If you are uncomfortable with ACL2 programming, we recommend that you study http://www.cs.utexas.edu/users/moore/publications/gentle-intro-to-acl2-programming.html and http://www.cs.utexas.edu/users/moore/publications/acl2-programming-exercises1.html.
However, we strongly recommend that you first invest in learning either the Emacs or Eclipse-based ACL2-Sedan program development environments, since it is foolish to try to learn how to program in a stand-alone read-eval-print loop!
While getting started, many users find the Hyper-Card a handy index into the documentation for the ACL2 language:
http://www.cs.utexas.edu/users/moore/publications/hyper-card.html
Once you are comfortable with the ACL2 programming language, use your browser's Back Button to return to introduction-to-the-theorem-prover.
