Major Section: MISCELLANEOUS

Examples: (IMPLIES (AND (RATIONALP LHS) (RATIONALP RHS) (BIND-FREE (FIND-MATCH-IN-PLUS-NESTS LHS RHS) (X))) (EQUAL (EQUAL LHS RHS) (EQUAL (+ (- X) LHS) (+ (- X) RHS)))) (IMPLIES (AND (BIND-FREE (FIND-RATIONAL-MATCH-IN-TIMES-NESTS LHS RHS MFC STATE) (X)) (RATIONALP X) (CASE-SPLIT (NOT (EQUAL X 0)))) (EQUAL (< LHS RHS) (IF (< 0 X) (< (* (/ X) LHS) (* (/ X) RHS)) (< (* (/ X) RHS) (* (/ X) LHS)))))

### BIND-FREE-EXAMPLES -- examples pertaining to

`bind-free`

hypotheses

General Forms:

(BIND-FREE term var-list) (BIND-FREE term t) (BIND-FREE term)A rule which uses a

`bind-free`

hypothesis has similarities to both a
rule which uses a `syntaxp`

hypothesis and to a `:`

`meta`

rule.
`Bind-free`

is like `syntaxp`

, in that it logically always
returns `t`

but may affect the application of a `:`

`rewrite`

or `:`

`linear`

rule when it is called at the top-level of a
hypothesis. It is like a `:`

`meta`

rule, in that it allows the
user to perform transformations of terms under progammatic control.Note that a `bind-free`

hypothesis does not, in general, deal with the
meaning or semantics or values of the terms, but rather with their
syntactic forms. Before attempting to write a rule which uses
`bind-free`

, the user should be familiar with `syntaxp`

and the
internal form that ACL2 uses for terms. This internal form is
similar to what the user sees, but there are subtle and important
differences. `Trans`

can be used to view this internal form.

Just as for a `syntaxp`

hypothesis, there are two types of
`bind-free`

hypotheses. The simpler type of `bind-free`

hypothesis may be used as the nth hypothesis in a `:`

`rewrite`

or `:`

`linear`

rule whose `:`

`corollary`

is
`(implies (and hyp1 ... hypn ... hypk) (equiv lhs rhs))`

provided `term`

is a term, `term`

contains at least one variable, and every variable
occuring freely in `term`

occurs freely in `lhs`

or in some `hypi`

,
`i<n`

. In addition, `term`

must not use any stobjs.
(Later below we will describe the second type, an *extended*
`bind-free`

hypothesis, which may use `state`

.)

We begin our description of `bind-free`

by examining the
first example above in some detail.

We wish to write a rule which will cancel ``like'' addends from both sides of an equality. Clearly, one could write a series of rules such as

(DEFTHM THE-HARD-WAY-2-1 (EQUAL (EQUAL (+ A X B) (+ X C)) (EQUAL (+ A B) (FIX C))))with one rule for each combination of positions the matching addends might be found in (if one knew before-hand the maximum number of addends that would appear in a sum). But there is a better way. (In what follows, we assume the presence of an appropriate set of rules for simplifying sums.)

Consider the following definitions and theorem:

(DEFUN INTERSECTION-EQUAL (X Y) (COND ((ENDP X) NIL) ((MEMBER-EQUAL (CAR X) Y) (CONS (CAR X) (INTERSECTION-EQUAL (CDR X) Y))) (T (INTERSECTION-EQUAL (CDR X) Y)))) (DEFUN PLUS-LEAVES (TERM) (IF (EQ (FN-SYMB TERM) 'BINARY-+) (CONS (FARGN TERM 1) (PLUS-LEAVES (FARGN TERM 2))) (LIST TERM))) (DEFUN FIND-MATCH-IN-PLUS-NESTS (LHS RHS) (IF (AND (EQ (FN-SYMB LHS) 'BINARY-+) (EQ (FN-SYMB RHS) 'BINARY-+)) (LET ((COMMON-ADDENDS (INTERSECTION-EQUAL (PLUS-LEAVES LHS) (PLUS-LEAVES RHS)))) (IF COMMON-ADDENDS (LIST (CONS 'X (CAR COMMON-ADDENDS))) NIL)) NIL)) (DEFTHM CANCEL-MATCHING-ADDENDS-EQUAL (IMPLIES (AND (RATIONALP LHS) (RATIONALP RHS) (BIND-FREE (FIND-MATCH-IN-PLUS-NESTS LHS RHS) (X))) (EQUAL (EQUAL LHS RHS) (EQUAL (+ (- X) LHS) (+ (- X) RHS)))))

How is this rule applied to the following term?

(equal (+ 3 (expt a n) (foo a c)) (+ (bar b) (expt a n)))As mentioned above, the internal form of an ACL2 term is not always what one sees printed out by ACL2. In this case, by using

`:`

`trans`

one can see that the term is stored internally as
(equal (binary-+ '3 (binary-+ (expt a n) (foo a c))) (binary-+ (bar b) (expt a n))).

When ACL2 attempts to apply `cancel-matching-addends-equal`

to the
term under discussion, it first forms a substitution that instantiates
the left-hand side of the conclusion so that it is identical to the
target term. This substitution is kept track of by the substitution
alist:

((LHS . (binary-+ '3 (binary-+ (expt a n) (foo a c)))) (RHS . (binary-+ (bar b) (expt a n)))).ACL2 then attempts to relieve the hypotheses in the order they were given. Ordinarily this means that we instantiate each hypothesis with our substitution and then attempt to rewrite the resulting instance to true. Thus, in order to relieve the first hypothesis, we rewrite:

(RATIONALP (binary-+ '3 (binary-+ (expt a n) (foo a c)))).Let us assume that the first two hypotheses rewrite to

`t`

. How
do we relieve the `bind-free`

hypothesis? Just as for a `syntaxp`

hypothesis, ACL2 evaluates `(find-match-in-plus-nests lhs rhs)`

in an environment where `lhs`

and `rhs`

are instantiated as determined
by the substitution. In this case we evaluate
(FIND-MATCH-IN-PLUS-NESTS '(binary-+ '3 (binary-+ (expt a n) (foo a c))) '(binary-+ (bar b) (expt a n))).Observe that, just as in the case of a

`syntaxp`

hypothesis, we
substitute the quotation of the variables bindings into the term to be
evaluated. See syntaxp for the reasons for this. The result of this
evaluation, `((X . (EXPT A N)))`

, is then used to extend the
substitution alist:
((X . (EXPT A N)) (LHS . (binary-+ '3 (binary-+ (expt a n) (foo a c)))) (RHS . (binary-+ (bar b) (expt a n)))),and this extended substitution determines

`cancel-matching-addends-equal`

's result:
(EQUAL (+ (- X) LHS) (+ (- X) RHS)) ==> (EQUAL (+ (- (EXPT A N)) 3 (EXPT A N) (FOO A C)) (+ (- (EXPT A N)) (BAR B) (EXPT A N))).Question: What is the internal form of this result?

Hint: Use

`:`

`trans`

.When this rule fires, it adds the negation of a common term
to both sides of the equality by selecting a binding for the
otherwise-free variable `x`

, under programmatic control. Note
that other mechanisms such as the binding of free-variables
may also extend the substitution alist.

Just as for a `syntaxp`

test, a `bind-free`

form signals
failure by returning `nil`

. However, while a `syntaxp`

test
signals success by returning true, a `bind-free`

form signals
success by returning an alist which is used to extend the current
substitution alist. Because of this use of the alist, there are
several restrictions on it -- in particular the alist must only
bind variables, these variables must not be already bound by the
substitution alist, and the variables must be bound to ACL2 terms.
If `term`

returns an alist and the alist meets these restrictions,
we append the alist to the substitution alist and use the result as
the new current substitution alist. This new current
substitution alist is then used when we attempt to relieve the next
hypothesis or, if there are no more, instantiate the right hand side
of the rule.

There is also a second, optional, `var-list`

argument to a `bind-free`

hypothesis. If provided, it must be either `t`

or a list of variables. If
it is not provided, it defaults to `t`

. If it is a list of variables, this
second argument is used to place a further restriction on the possible values
of the alist to be returned by `term`

: any variables bound in the alist
must be present in the list of variables. We strongly recommend the use of
this list of variables, as it allows some consistency checks to be performed
at the time of the rule's admittance which are not possible otherwise.

An extended `bind-free`

hypothesis is similar to the simple type
described above, but it uses two additional variables, `mfc`

and `state`

,
which must not be bound by the left hand side or an earlier hypothesis
of the rule. They must be the last two variables mentioned by `term`

:
first `mfc`

, then `state`

. These two variables give access to
the functions `mfc-`

xxx; see extended-metafunctions. As
described there, `mfc`

is bound to the so-called
metafunction-context and `state`

to ACL2's `state`

. See bind-free-examples
for examples of the use of these extended `bind-free`

hypotheses.